Unless otherwise specified, the standard range of atmospheric conditons for making measurementsand tests are as follows:
Ambient temperature: 5 to 35 degrees Celisus
Releative humidity: 45% to 85%
Air pressure: 85kPa to 106kPa
If there is any doubt about the results, measurements shall be made within the following limits:
Ambient temperature: 20 +/- 1 degrees Celsius
Relative humidity: 60% to 70%
Operating temperature range: -25 to 60 degrees Celisus
Humidity range: 85% RH
Construction:
Mating limit: mating limit or range of betweeen the plug and the spring of pin jack shall be not regulated
Connection timing: the pin jack shall be permitted with connection timing whether shorting or not between the mutually separatedterminals or springs of the pin jack, during the plug inserting and extracting
Creepage distance and spacing: creepage distance andspacing between matually insulated parts shall be 0.3mm minimum, these distance and spacing shall be maintained with or without thegauge plug inserted
Electrical characteristics:
Rated voltage/rated current: 34V DC 2A
Insulation resistance: 100 megaohms
Contact resistacne: 30 megaohms
Mechanical characteristics:
Operating force:
Inserion force: 29.4N (3kgf)
Withdrawal force: 0.98N to 29.4N (0.1kgf to 3.0kgf)
Enduracne characteristics:
Operating endurace: electrical and mechanical characteristicsshall be satisfied
Humidity test: electrical and mechanical charcteristics shall be satisfied
Insulation resistance: 50 megaohms
Dry heat/cold: electrical and mechanical characteristics shall be satisfied
Resistance to soldering heat test:electrical and mechanical characterisitcs shall be satisfied and not show remarkable failure
Supplier and product information updated May 08, 2012.
Verified Business Registration Details
Registered Company:
京鑰企業有限公司
Business Registration Number: 12724135
Company Registration Address: 新北市新店區寶橋路235巷123號7樓之2 * In some jurisdictions, company names and addresses are registered in Chinese only.
